REEKON M1 Caliber Measuring Tool for Miter, Chop, and Band Saws – Eliminates Need to Measure & Mark Materials, Reduces Cut Time and Increases Safety, Measures Flat & Round Materials

(10 customer reviews)

$190.64

About this item
This fits your .

Make sure this fits by entering your model number.

A BETTER WAY TO MEASURE – The M1 Caliber is a fully integrated, patent-pending, measuring tool that clamps to almost any kind of saw fence and outputs measurements of materials slid underneath its wheel on a large, backlit, LCD screen. DIGITIZE YOUR MITER SAW – Using modern technology with a focus on functionality, measure and cut stock materials up to 3 times faster than conventional methods and measuring tools. The M1 Caliber eliminates the need for a tape measure and pencil. COMPATIBILITY – Displays both English and Metric measurements and is compatible with most miter, cut-off, chop and vertical band saws. Make miter, bevel, compound, and straight cuts on a variety of materials ranging from boards to composites to pipe. INCREASED SAFETY – Whether cutting dimensional lumber to frame out a home, cutting composite planks for decking or putting the finish touches on an interior job, the M1 centralizes measurement related activity to a single location. QUICK AND EASY SETUP – Clamp to your saw fence, release the arm, input your blade thickness and begin to cut. Perfect for professionals, contractors, woodworkers and other tradespeople. The M1 will provide the most accurate read on smooth materials.
› See more product details

Add to Wishlist
Add to Wishlist

SKU: B098TTZZYL Category:


Product Description

Manufacturer

‎REEKON Tools

Part Number

‎RKN-M1-001-A

Item Weight

‎1 pounds

Product Dimensions

‎6.1 x 4.5 x 3 inches

Country of Origin

‎Malaysia

Item model number

‎RKN-M1-001-A

Batteries

‎2 AA batteries required.

Is Discontinued By Manufacturer

‎No

Material

‎Polymer

Power Source

‎Battery

Item Package Quantity

‎1

Type of Bulb

‎LCD

Measurement System

‎English/Standard

Usage

‎Measuring Material

Included Components

‎M1 Caliber, Case

Batteries Included?

‎No

Batteries Required?

‎Yes

Description Pile

‎AA

ASIN

B098TTZZYL

UNSPSC Code

27110000

Customer Reviews

/* * Fix for UDP-1061. Average customer reviews has a small extra line on hover * https://omni-grok.amazon.com/xref/src/appgroup/websiteTemplates/retail/SoftlinesDetailPageAssets/udp-intl-lock/src/legacy.css?indexName=WebsiteTemplates#40 */ .noUnderline a:hover { text-decoration: none; } 4.3 out of 5 stars 559 ratings P.when('A', 'ready').execute(function(A) { A.declarative('acrLink-click-metrics', 'click', { "allowLinkDefault" : true }, function(event){ if(window.ue) { ue.count("acrLinkClickCount", (ue.count("acrLinkClickCount"), 0) + 1); } }); }); P.when('A', 'cf').execute(function(A) { A.declarative('acrStarsLink-click-metrics', 'click', { "allowLinkDefault" : true }, function(event){ if(window.ue) { ue.count("acrStarsLinkWithPopoverClickCount", (ue.count("acrStarsLinkWithPopoverClickCount"), 0) + 1); } }); }); 4.3 out of 5 stars

Best Sellers Rank

#14,613 in Tools & Home Improvement (See Top 100 in Tools & Home Improvement) #5 in Miter Saw Accessories

Date First Available

July 16, 2021

10 reviews for REEKON M1 Caliber Measuring Tool for Miter, Chop, and Band Saws – Eliminates Need to Measure & Mark Materials, Reduces Cut Time and Increases Safety, Measures Flat & Round Materials

  1. Heraldo

    The media could not be loaded.

  2. steven sleight

    I was making a bed for my daughter and was going to need to make a ton of cuts. I’m normally the type of person that measures 3-4 times before I cut just ti make sure. This allowed me to place the boards on the saw, feed them through, and cut. I never needed to worry about measuring, marking, measuring again, and then transferring to the saw. Saved me a ton of time in my project. Definitely would recommend if you have the money to spend. It’s not needed, but it’s worth the time savings to me.

  3. Glenn ReedGlenn Reed

    Loved the build quality and the ease of use. It seems I have less and less time and more and more to do – so always on the lookout for opportunities to get my work done, (the right way) but in less time. I grew up with “measure twice and cut once”…just save 1/2 the time; measure once, cut once- PERFECT! My project list will start to get smaller now! Thanks Reekon!!

  4. Jerry W.

    Some what a little bit difficult to zero in.

  5. TTSHOPPER

    So much faster than taking out the tape measure each time to check your cuts. VERY ACCURATE

  6. Leslie Eidson

    I used it on my miter saw so I didn’t have to continue to measure each board. The device is very accurate on the measurements the numbers are very easy to read on the display. Wish I would have bought one earlier.

  7. Michael

    This is such a time saver. I now use it to measure the first board, then place my stop block to cut the subsequent boards so they are all exactly the same length. At first I had trouble due to the thickness of the blade, but once I ran through the full calibration and set the blade thickness, all is working well. I keep it on my miter saw and use it a lot!

  8. Tommy Richard West, Jr

    yea sure it looks and feels like a quality tool but that’s where it stops for me. I’ am a professional carpenter and so I have my miter saw on a table with an adjustable material stop which makes accurate multiple cuts fast as in like a couple seconds apart. I was thinking this would make things like extremely accurate but found the cuts varies on average 1/4″ short. for this to work properly you have to move the material pretty slow to make sure the wheel don’t skip. As for the time I spend 20 to 30 seconds getting each cut where I needed the measurement to read what I wanted. I found this to be nearly 30 times slower than just using my other setup and un reliable on accuracy. If it was heavier it would make a good door stop but crap that’s just another thing it just don’t do well. Looks like a lesson learned

  9. Kindle Customer Jewel

    Ordered and received the same day! Installed same evening ….. works as promised

  10. Wesley Wesley

    This is a very nice tool for your saw and is very precise once you get it calibrated correctly. One mistake I made is after the initial calibration was I didn’t add the saw width to the tool like you’re supposed to do. Every time I calibrated it, it was always 1/16 off of the cuts I was trying to make but once you add the difference for the saw blade it is dead on every time. Another thing is making sure it’ll fit your saw. It wasn’t compatible with my saw because the fence was too short so I had to get the adapter fence to make it work and with that I was able to cut 4 inch pieces of wood. Overall it’s an awesome tool to add to your saw especially if you are making a lot of cuts and don’t want to measure every piece before you cut it

Add a review

Your email address will not be published.